Tieline VIA Quick Start User Manual page 24

24 ViA User Manual v1.2
7. Use the on-screen keypad to enter the IP address, or alphanumeric characters in the SIP
URI of the codec you want to dial, then tap Accept in the top right-hand corner of the
TOUCH SCREEN to confirm all settings.
8. Tap Via to adjust the interface used to dial the connection.
9. Tap to select None as the SIP account when dialing peer-to-peer, or select a registered SIP
account if you are using a SIP server to establish a connection.
Important Note: Any valid SIP server accounts registered successfully into the codec
will be displayed in the Select SIP Account screen. Tap to select an account if you want
to use a SIP server to establish the connection.
© Tieline Pty. Ltd. 2016