Part I Warnings & Safety Information - Tieline VIA Quick Start User Manual

Hide thumbs Also See for VIA:
Table of Contents

Advertisement

1
Warnings & Safety Information
1. The power cable and battery must be removed from the device for Power Disconnection.
2. Remove phone or ISDN cables from the codec before removing a module or servicing.
THUNDERSTORM AND LIGHTNING WARNING:
DO NOT USE Tieline codecs during thunderstorms and lightning. You may suffer an injury
using a phone, Tieline codec, or any device connected to a phone during a thunderstorm. This
can lead to personal injury and in extreme cases may be fatal. Protective devices can be
fitted to the line, however, due to the extremely high voltages and energy levels involved in
lightning strikes, these devices may not offer protection to the users, or the Tieline codec and
equipment connected to the codec.
Secondary strikes can occur. These secondary strikes are induced by lightning strikes and
also produce dangerously high currents and energy levels. You only need to be near an object
struck by lightning to lead to personal injury or damage to equipment. e.g. if you are located
near a lighting tower at a sports facility, water features and drains on golf courses, you may
be affected by these secondary strikes.
Damage to personnel and Tieline codecs may occur during thunderstorm, even if the codec is
turned off but remains connected to the phone or ISDN system, LAN or the power.
ANY DAMAGE TO A TIELINE PRODUCT CAUSED BY LIGHTNING or an ELECTRICAL
STORM WILL VOID THE WARRANTY.
DIGITAL PHONE SYSTEM WARNING:
DO NOT CONNECT THE ANALOG POTS MODULE TO A DIGITAL PHONE SYSTEM.
PERMANENT DAMAGE MAY OCCUR! If you are unfamiliar with any facility, check that the
line you are using is NOT a digital line. If the Tieline codec becomes faulty due to the use of
a digital phone system, the WARRANTY WILL BE VOID.
SAFETY PRECAUTION:
· Any procedures that involve opening panels or changing components must be performed by
qualified service personnel only.
SERVICING WARNINGS:
· Do not perform any servicing other than that contained in the operating instructions unless
you are qualified to do so.
· All work should be carried out by suitably qualified personnel.
LINE VOLTAGE:
· Before connecting the AC adapter to the power line, make sure the voltage of the power
WARNING: To Reduce the Risk of Electrical Shock and Fire
1. All servicing must be undertaken only by qualified service personnel. There are not user
serviceable parts inside the unit.
2. DO NOT plug in, turn on or attempt to operate an obviously damaged unit.
3. Ensure that the chassis ventilation slots/holes in the unit are NOT COVERED OR
BLOCKED.
4. Do not operate the device in a location where the maximum ambient temperature exceeds
40°C (104°F), or is below 0°C (32°F).
© Tieline Pty. Ltd. 2016
source matches the requirements of the device. Refer to the device Specifications for
information about the correct power rating for the unit.
ViA User Manual v1.2
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Via

Table of Contents