Tieline VIA Quick Start User Manual page 19

You can also select a specific interface, e.g. Primary
displayed in the preceding image. Interfaces are not displayed if they are unavailable, e.g. if Wi-
Fi is turned off or there is no cellular modem attached to USB PORT 1
reconfigure the default Primary
9. If required:
· Tap Remote Session Port to enter the session port number of the remote codec (to which
you are dialing).
· Tap Remote Audio Port to enter the audio port number of the remote codec (to which you
are dialing).
Important Note: Sessionless connections provide the ability to change the Remote
Audio Port and Local Audio Port setting.
When these settings are completed tap Done in the top right-hand corner of the TOUCH
SCREEN.
10. Tap to toggle the On/Off button for Auto reconnect if you want the codec to automatically
reconnect when the connection is temporarily lost.
11. Tap Jitter Buffer to select a different automatic jitter buffer setting for your connection, or to
enter a fixed buffer setting in milliseconds (maximum 5000 ms). The default Auto, Best
Compromise setting is a good starting point for most internet connections. Note: The
Depth setting allows you to select predetermined minimum and maximum jitter settings
within the auto jitter buffer's minimum and maximum jitter limitations. The default setting of
60 to 1000ms is a good starting point for most networks.
12. Tap FEC to configure local and remote forward error correction settings.
© Tieline Pty. Ltd. 2016
,
Secondary and Tertiary settings see the main user manual.
ViA User Manual v1.2
, ,
Secondary LAN1
or
USB PORT 2. To
19
or
LAN2, as