Sample Programs - Rabbit RabbitCore RCM2200 User Manual

3.4 Sample Programs

Sample programs are provided in the Dynamic C
The various folders contain specific sample programs that illustrate the use of the corre-
sponding Dynamic C libraries. For example, the sample program
the output to the Dynamic C
Two folders contain sample programs that illustrate features unique to the RCM2200.
—Demonstrates the basic operation and the Ethernet functionality of the
•
RCM2200
RCM2200.
—Demonstrates more advanced TCP/IP programming for Z-World's Ethernet-
•
TCPIP
enabled Rabbit-based boards.
Follow the instructions included with the sample program to connect the RCM2200 and
the other hardware identified in the instructions.
To run a sample program, open it with the
using the menu, and then run it by selecting
Compile
RCM2200 must be in Program Mode (see Section 3.2, "Programming Cable"), and must
be connected to a PC using the programming cable.
More complete information on Dynamic C is provided in the Dynamic C User's Manual.
18
Samples
STDIO window.
menu (if it is not still open), compile it
File
folder, which is shown below.
demonstrates
PONG.C
in the menu. The
Run Run
RabbitCore RCM2200