TITLE
PM43 Service Work Instructions
Media Shaft Divert Installation
1. Open media cover
2. Hand screw media shaft divert to the spine (main deck).
Figure 6 – Location of media shaft divert
Batch Plate Installation
1. Remove front media door. See page 26 on how to remove the front media door.
2. Remove tear bar and re-use the 3 Torx screws for batch plate installation
3. Install batch plate. See Figure 5.
Media Shaft Divert
Installation
Location
9
Figure 7 – Batch Plate Installation
Intermec Proprietary Document
Model
DOCUMENT NO.
PM43,PM43C
SWIPM43x-000
Media Shaft Divert
9
9
PAGE
Page
64 of 70
7
6