Kit, Service, Drive Pulley - Intermec pm43 Service Manual

TITLE
PM43 Service Work Instructions

Kit, Service, Drive Pulley

OPERATION:
This is NOT a customer replaceable part.
Tools Required
Description
Allen Driver, 1.5mm-2.0mm
Parts Required
Item Part Number
1 201-028-001
Drive Pulley Replacement Instructions
1. Remove the service pulley cover (guard) as shown in Figure 1 and slip the timing belt off with an upward motion
2. Using a 6/64 Allen Driver release the set screw and pull up as shown in Figure 2
3. For installation reverse these steps
Description
Pulley, Drive Kit Spare PM43 ( Include Platen Roller Coupling P/N655-318-001, and
set screw P/N 1-994109-00)
Figure 1
Pulley, Drive Kit, Spare, PM43
Intermec Proprietary Document
Model DOCUMENT NO.
PM43,PM43C SWIPM43x-000
Part Number
Figure 2
PAGE
Page
57 of 70
Qty
1