Remove the power supply assembly from the server.
a.
Remove the power supply from its tray.
b.
To replace the component, reverse the removal procedure.
HPE 800 W/900 W Gold AC Power Input Module
To remove the component:
Unlock and remove the tower bezel
1.
Power down the server (on page 23).
2.
Access the product rear panel.
3.
Remove all power:
4.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
("Remove the tower
bezel" on page 23).
Removal and replacement procedures 57