Ac Input Power - HP rx5670 Hardware Installation Manual

Cable Connections

AC Input Power

AC Input Power
The hp server rx5670 comes with two power supplies installed: each with one AC input connector. The input
for each connector is rated for 100 to 240 VAC at 13 Amps. As a minimum, both power supplies must be
connected to an AC power source. A third power supply may be installed to provide N+1 capability.
WARNING Voltage is present at various locations within the server whenever an AC power
source is connected. This voltage is present even when the main power switch is in
the off position. Failure to observe this warning could result in personal injury or
damage to equipment.
Figure 3-1 rx5670 (rear view)
38
Chapter 3