Diagnostic Tools; Hpe Uefi System Utilities; Using Uefi System Utilities; Flexible Boot Control - HP ProLiant ML150 Gen9 Maintenance And Service Manual

Diagnostic tools

HPE UEFI System Utilities

The HPE UEFI System Utilities is embedded in the system ROM. The UEFI System Utilities enable you to
perform a wide range of configuration activities, including:
•
Configuring system devices and installed options
•
Enabling and disabling system features
•
Displaying system information
•
Selecting the primary boot controller
•
Configuring memory options
•
Selecting a language
•
Launching other pre-boot environments such as the Embedded UEFI Shell and Intelligent
Provisioning
For more information on the UEFI System Utilities, see the UEFI System Utilities User Guide for HPE
ProLiant Gen9 Servers on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/ProLiantUEFI/docs).
Scan the QR code located at the bottom of the screen to access mobile-ready online help for the UEFI
System Utilities and UEFI Shell. For on-screen help, press F1.

Using UEFI System Utilities

To use the UEFI System Utilities, use the following keys.
Action
Access System Utilities
Navigate menus
Select items
Save selections
Access Help for a highlighted configuration
option*
*Scan the QR code on the screen to access online help for the UEFI System Utilities and UEFI Shell.
Default configuration settings are applied to the server at one of the following times:
•
Upon the first system power-up
•
After defaults have been restored
Default configuration settings are sufficient for typical server operations; however, you can modify
configuration settings as needed. The system prompts you for access to the System Utilities each time the
system is powered up.

Flexible boot control

This feature enables you to do the following:
•
Add Boot Options
Key
F9 during server POST
Up and Down arrows
Enter
F10
F1
Diagnostic tools 61