Storage Drive; Hot-Plug Drive Blank; Hot-Plug Drive - HP ProLiant ML150 Gen9 Maintenance And Service Manual

Two-processor configuration
o
To replace the component, reverse the removal procedure.

Storage drive

Hot-plug drive blank

CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
To remove the component:
Unlock and remove the tower bezel
1.
Remove the drive blank.
2.
To replace the LFF drive blank, slide the component into the bay until it clicks.
To replace the SFF drive blank, while pressing the release latch, slide the component into the bay until it
is fully seated.

Hot-plug drive

("Remove the tower bezel" on page 23).
Removal and replacement procedures 27