Front Panel Leds And Buttons - HP ProLiant ML150 Gen9 Maintenance And Service Manual

Front panel LEDs and buttons

Item Description
Health LED
1
NIC status LED
2
Power On/Standby button
3
and system power LED
* To identify components in a degraded or critical state, review the system IML or use iLO to review the system health
status.
** Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has
occurred, or the power button cable is disconnected.
Status
*Solid green = Normal
Flashing green (1 Hz/cycle per sec) = iLO is rebooting.
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing power on sequence
Solid amber = System in standby
Off = No power present**
Component identification 68