Mitsubishi Electric QD62 User Manual page 114

8 PROGRAMMING
8 - 22
(a) When using the sampling counter function and the periodic
pulse counter function, use the following programs.
1) When the sampling counter function is used
2) When the periodic pulse counter function is used
(b) When using the functions listed below, use the following
programs.
1) When the disable count function is used
2) When the latch counter function is used
MELSEC-Q
Set the sampling time to
10000 ms
Periodic pulse time to
5000 ms
Selects the disable count
function
Starts the disable count function
Stops the disable count function
Selects the latch counter
function
Starts the latch counter function
Stops the latch counter function
Reads the latch count value
8 - 22