7 UTILITY PACKAGE (GX Configurator-CT)
7.4 Initial Settings
7 - 12
[Purpose of operation]
Perform the initial settings for each channel to operate the QD62 (E/D).
Set the following initial setting parameters:
• Preset value
• Coincidence output point set No.1
• Coincidence output point set No.2
• Counter function selection setting
These initial settings eliminate the need to set sequence programs.
[Startup procedure]
"Start I/O No. "
Enter the start I/O No. in hexadecimal
[Setting screen]
CH1 Initial setting
"Module type"
"Module model name"
MELSEC-Q
• Sampling/periodic setting
• Ring counter maximum value
• Ring counter minimum value
Initial setting
CH2 Initial setting
7 - 12