Network Setup - Matrix XR Service Manual

CHAPTER 7: XIR/ XER CONSOLE SERVICE MODE

7.6 Network setup

Category Name
Wifi Mac
Address
Network
Setup
Wifi
Setup
Network
Available
Wireless
Setup
Networks
(Wifi Setup)
Default Range
0.0.0.0.0.0
Hardware
255.255.255.25
Specified
5.255.255
-- --
Wireless
networks in
range with
'Other Network'
always shown at
--
the bottom of
the list in order
for the user to
specify their
own network
Units
-
Byte.Byte.Byte.Byte.Byte.
ByteIn Hex
--
If the user selects 'Other
Network' they should be
prompted to enter the
Network Name,
Password and the
security protocol from
None, WEP, WPA, WPA2,
WPAPSK, WPA2PSK.If
the user selects the
network the console is
currently connected to
(indicated by a different
colored Wifi symbol) they
should be prompted with
the option to forget the
settings for that network.
Comments
Mac address is PULLED.
Read Only, should not show
up if not connected to Wifi.
Goes to the Wifi setup page.
Follows the same look and
function as First Time Setup
for Wifi setup: lists available
wireless networks, their
signal strength on the
console and which one the
console is connected to if it is
connected to one. Tapping a
network name has the
console prompt the user to
enter the network password if
there is one required. If the
user inputs the wrong
credentials the system
notifies them that the console
was unable to connect to the
network and they are
returned to the network list.
36