Hardware; Restore Factory Defaults - Matrix XR Service Manual

CHAPTER 5: XIR/ XER CONSOLE SETTINGS

5.7 Hardware

Category Name
ErP
Hardware
ErP
Timeout
Backlight
Brightness
Master
Volume

5.8 Restore Factory Defaults

Always available, not in its own tab .
Category
Restore Factory
Defaults Always
available, not in it's
own tab
Default Range
No Check/No
Check Check
15 1-60
100 0-100
5 0-30
Name Default
Restore
Factory --
Defaults
Units
Alternates between ErP which puts the
console in a low power mode and launching
the Demo Video. When checked the console
goes into ErP, when not checked the console
launches the Demo Video. These actions
occur after a time of inactivity (no workout,
--
touch events, etc.) determined by the ErP
Timeout setting. Pressing any physical key
wakes up the console from ErP or the Demo
Video and returns it to the Home/Go Screen.
The Demo Video can also be exited by
touching the screen.
Amount of time after which the console
Minutes
enters a low power mode or the Demo Video
-- Set the brightness of the screen.
All apps have their volume maxed, this sets
the system-wide volume. The volume
--
matches the DQE standard. Does not affect
the system beep volume.
Range Units
-- --
Comments
Comments
Resets various options, counters, and
configuration values to defaults given to
the factory for production. See the
Factory Defaults Table for a list of options
and values. It also resets the First Time
Setup wizard to run again
25