Network Setup; Network Setup (Wifi Setup) - Matrix XR Service Manual

CHAPTER 5: XIR/ XER CONSOLE SETTINGS
\

5.3 Network Setup

Category Name
Wifi Mac
Address
Network
Setup
Wifi
Setup

5.4 Network Setup (Wifi Setup)

Category Name
Network
Available
Wireless
Setup
Networks
(Wifi Setup)
Default Range
0.0.0.0.0.0
Hardware
255.255.255.25
Specified
5.255.255
-- --
Default Range
Wireless networks
in range with
'Other Network'
always shown at
--
the bottom of the
list in order for the
user to specify
their own network.
Units
-
Byte.Byte.Byte.Byte.Byte.
ByteIn Hex
--
Units
If the user selects 'Other
Network' they should be
prompted to enter the
Network Name,
Password and the
security protocol from
None, WEP, WPA, WPA2,
WPAPSK, WPA2PSK.If
the user selects the
network the console is
currently connected to
(indicated by a different
colored Wifi symbol) they
should be prompted with
the option to forget the
settings for that network.
Comments
Mac address is polled from
the installed hardware.Read
Only, should not show up if
not connected to Wifi.
Goes to the Wifi setup page.
Comments
Follows the same look and
function as First Time Setup
for Wifi setup: lists available
wireless networks, their
signal strength on the
console and which one the
console is connected to if it is
connected to one. Tapping a
network name has the
console prompt the user to
enter the network password if
there is one required. If the
user inputs the wrong
credentials the system
notifies them that the console
was unable to connect to the
network and they are
returned to the network list.
Additionally, tapping on the
network the console is
currently connected to
(indicated by a different
colored Wifi symbol) will
present a dialog with the
option to forget the settings
for that network..
23