San Readiness - Quantum Scalar i6000 Planning Manual

Chapter 4: Site Preparations

SAN Readiness

SAN Readiness

82
If your mail server requires a user name and
password you can enable this on the library
and enter these for e-mail authentication.
E-mail addresses of local
administrators to be notified
if issues arise with the library:
Operating system and
version running off the
remote servers that will
connect to the library:
All servers or appliances intended to communicate with the Scalar i6000
robotic controller or tape drives must be already installed on the SAN
before configuring the library for fiber channel SAN connectivity.
Additionally, the World Wide Names (WWNs) of the associated fiber
channel HBAs should be visible on the SAN. This is necessary because
the Scalar i6000 "Extended Virtual Private SAN" (eVPS) feature can only
grant LUN access to WWNs it discovers on the SAN at the time of
configuration.
Are all necessary servers or appliances visible on the SAN? (Y or N):
________
Scalar i6000 Planning Guide