Hitachi G200 User Manual page 59

• Some switch vendors require F port connectivity (for example, McData
ED5000).
As shown in the following table, fabric settings, topology settings, and
available link speed depend on the settings of the packages and protocols
used for the storage system connections, as well as whether host mode
option 51 is used.
Note: If you connect storage systems using iSCSI, host mode option settings
become invalid.
Package
name
4HF8 8GbpsFC
2HF16 16GbpsFC
2HS10S 10 Gbps
iSCSI
2HS10B 10 Gbps
iSCSI (10G
BASE-T)
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models
Host mode
Protocol
option 51
OFF
ON
OFF
ON
N/A
N/A
Planning for TrueCopy
Initiator
port and
Fab RCU target
port
topology
ON Point-to-Point •
ON Point-to-Point •
ON Point-to-Point •
ON Point-to-Point •
N/A N/A
N/A N/A
Available
link speed
2 Gbps
• 4 Gbps
• 8 Gbps
2 Gbps
• 4 Gbps
• 8 Gbps
4 Gbps
• 8 Gbps
• 16 Gbps
4 Gbps
• 8 Gbps
• 16 Gbps
10 Gbps
• 10 Gbps
• 1 Gbps
3-31