B Tc Gui Reference; Replication Window; Remote Replication Window - Hitachi G200 User Manual

B
TC GUI reference
This appendix describes Device Manager - Storage Navigator windows and
fields used for TrueCopy. The following key topics are covered:
Important: Procedures in this manual are tailored to the Device Manager -
Storage Navigator (HDvM - SN) GUI. When using this GUI, "Local Storage
System" displays for the system you have accessed on the HDvM - SN server.
As a result, if you access the remote site's HDvM - SN server, the GUI
displays information for the pair's remote (secondary) system under "Local
Storage System". Likewise, the GUI in this case identifies the storage system
connecting to the accessed system as the "Remote Storage System".
However, this manual uses the terms "primary storage system" or "primary
system" for the storage system in which the primary volume (P-VOL) is
located in the local site, and "secondary storage system" or "secondary
system" for the storage system in which the secondary volume (S-VOL) is
located in the remote site, unless otherwise noted.

□ Replication window

□ Remote Replication window

□ Remote Connections window
□ Add Remote Connection wizard
□ View Remote Connection Properties window
□ Remove Remote Connections window
□ Edit Remote Connection Options wizard
□ Add Remote Paths wizard
B-1
TC GUI reference
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models