Hitachi G200 User Manual page 157

Item
Copy Type
Status
Remote Storage System
Path Group ID
1
Update Type
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models
A hyphen (-) is displayed for an external volume or a
migration volume. For DP-VOLs, the pool to which the
LDEV belongs is either an external volume or blocked.
•
1
T10 PI : Volume's T10 PI attribute information.
Enabled: Volume's T10 PI attribute is enabled.
¢
Disabled: Volume's T10 PI attribute is disabled.
¢
•
Virtual storage machine
model type and serial number.
• 1
Virtual LDEV ID : Volume's virtual LDEV identifier.
When the virtual LDEV ID is not assigned, this item is
blank.
•
Virtual Device Name
the format:
virtual emulation type/number of virtual LUSE volumes/
virtual CVS attribute
- Only attributes that are specified display.
- "CVS" displays at the end of the device name, if the
virtual CVS attribute is specified.
- A blank indicates no values are specified.
•
1
Virtual SSID : Volume's virtual SSID. A blank indicates
that no virtual SSID is specified.
• TC: TrueCopy
Pair status.
For status definitions, see
7-4
Information about volumes in the storage system connected
to the accessed system.
• Model / Serial Number: Remote system's model and
serial number.
• LDEV ID: LDEV identifier.
• Port ID: Port identifier when specifying an LDEV ID at
pair creation. Note that this field does not change if the
remote system path settings are changed.
• Host Group ID / iSCSI Target ID: Host group or iSCSI
target identifier.
• LUN ID: LUN identifier.
•
Virtual storage machine
model type and serial number.
•
1
Virtual LDEV ID : Volume's virtual LDEV identifier.
Path group identifier.
One of the following:
• Sync: It is a TC pair which is not assigned to
consistency group.
• Sync (Specified CTG): It is a TC pair created by
specifying consistency group.
TC GUI reference
Description
1
: Virtual storage machine's
1
: Volume's virtual device name, in
Pair status definitions on page
1
: Virtual storage machine's
B-7