Mitsubishi HMA100V Technical Manual page 192

FDCW100VNX
Fan and fan motor (FMo1)
5. Loose 4 screws
6. Remove the fan motor
Compressor (CM)
1. Loosen screws and remove
the service panel and top
panel.
2. Loosen 4 short screws and
4 long screws and then
remove the bar for easy
access to the compressor.
3. Loosen screws and remove
the side panel
4 screws
2 screws (short)
- 191 -
'10 • HM-T-149
Component replacement
4 screws (short)
Bar
4 screws (long)
7 screws (short)
Rear panel
1 screw (long)
Side panel
Service