Mitsubishi HMA100V Technical Manual page 187

FDCW71VNX
Compressor (CM)
2. Remove the top and inner
insulations.
3 Cut off the strap and pull
out the sensor (Tho-D)
4. Remove the terminal cover
5. Disconnect the fasten terminal
connectors from compressor.
U: Red cable
V: White cable
W: Blue cable
6. Remove the crankcase
heater
7. Unscrew and disconnect
the grounding cable
8. Loosen 3 nuts of
compressor fixing bolts
9. Disconnect the pipes for
suction and discharge gas
10. Remove the compressor
Top insulation
Inner insulation
Terminal cover
Screw for
grounding cable
Suction gas pipe
- 186 -
Component replacement
Crankcase heater
3 nuts of compressor
fixing bolts
Discharge gas pipe
'10 • HM-T-149
Service
Tho-D