GE SVI II AP Quick Start Manual page 69

3 MODEL NUMBER DESCRIPTION OF SVI-II AP
"SVI2-abcdefgh" Not all combinations are available.
SVI2- a
0
ES -Easy
Smart (1)
1
SD - Standard
Diagnostics
2
Remote Sensing
AD - Advanced
Diagnostics
3
Remote Sensing
OD - On-Line
Diagnostics
4
Remote Sensing
PC - Process
Controller
5
Remote Sensing
6
Style
(1) Not available in a flameproof housing.
(2) The SVI-II AP may be up-graded in the field by the addition of a display and buttons.
(3) Not available on SVI2-abcdefg0
(4) Retransmit without digital output is available only on SVI2-abcdefg0
4 FLAMEPROOF and DUST IGNITION PROOF REQUIREMENTS
4.1 General
The 1/2 inch NPT fittings must enter the housing at least five full turns. The cover
flange must be clean and free of corrosion products.
4.2 Cable Glands
Certified cable glands are required based on the hazardous area the device is
installed in. That is, the particular cable gland used must have the same certification
as the tick-box checked off on the label (see Section 6).
4.3 Natural gas
Use of a pressurized gas which is ignitable in the presence of air (for example
natural gas) is not allowed as the SVI II AP supply pressure in a flameproof
(protection type "d") installation.
4.4 Bolting
ES-699 Rev AA
Page 3 of 16
© 2015 General Electric Company. All rights reserved
b c
Single Acting Standard Flow
Double Acting High Capacity
Pneumatics Capacity
d e
No Display
No Buttons
Industrial
Display
Buttons
Industrial (2)
Plug-in
No Display
Electronics
No Buttons
Module
Offshore
(MNCB)
Display
Buttons
Offshore (2)
Display Electronics
. Masoneilan SVI II AP Digital Positioner Quick Start Guide =| 69
f g
Hart
None
4 to 20 MADC
Retransmit
and Digital
Out (Note
3)
Retransmit
(Note 4)
Communication Option
h
Generic ( National
Labeling as Required)
FM, CSA,ATEX, IEC
(XP, DIP, IS, NI)
FM, CSA ATEX (IS,
NI)
ATEX (IS, NI)
FM, CSA,ATEX,IEC
(XP, DIP, IS, NI)
Nuclear
Hazardous
Certification