Removing The Com Port Bracket - Lenovo x3550 M5 Installation And Service Manual

Removing the COM port bracket

Use this information to remove the COM port bracket.
To remove the COM port bracket, complete the following steps:
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on
page 116.
Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3. Remove the cover (see "Removing the cover" on page 119).
Step 4. Disconnect the COM port bracket cable from the system board.
Figure 175. Disconnecting COM port bracket cable from system board
Step 5. Loosen the screws; then remove the COM port bracket connector from the opening of PCIe riser 2
assembly.
250
Lenovo System x3550 M5 Installation and Service Guide
COM port cable connector