Lenovo x3550 M5 Installation And Service Manual page 144

d. Press down on the retention clip until it snaps in place to hold the battery or flash power
module firmly in place.
Figure 44. RAID adapter battery or flash power module installation for 2.5-inch hard disk drive server
models
Steps for installing the RAID adapter battery or flash power module for 3.5-inch hard disk
drive server models.
a. Press the blue release tabs and lift the battery or power module holder upward.
b. Align the cable connector with the slot on the holder. Place the battery or flash power module
into the holder and make sure that the holder engages the battery or flash power module
securely.
c. Connect the other end of the cable to the battery or flash power module.
d. Press the blue release tabs and lower the battery or power module holder into the chassis.
130
Lenovo System x3550 M5 Installation and Service Guide
Holder
Battery / flash power module
Retention clip