Media cage
Figure 173. LCD system information display panel installation
Step 5.
Carefully insert the tab on the retention bracket into the slot on the LCD panel assembly and rotate
it counterclockwise until it clicks into place.
Media cage
Figure 174. Retention bracket installation
Step 6.
Connect the LCD system information display panel cable to the back of the LCD system
information display panel.
Step 7.
Carefully push the media cage back into the chassis (see "Replacing the media cage" on page
231). Remember to reconnect the cables that were removed from the system board.
Step 8.
Reinstall the cover (see "Replacing the cover" on page 120).
Step 9.
Slide the server into the rack.
Step 10. Reconnect the power cords and any cables that you removed.
Step 11. Turn on the peripheral devices and the server.
LCD display
Retention bracket
Chapter 5
.
Removing and replacing components
249