Charging the Battery Pack
You can charge the Dolphin's main battery pack with one of the following
methods:
•
Place the battery pack in the Dolphin 7400/7450 terminal and then place the terminal in
the terminal well of a charging/communication cradle.
•
Place the battery pack in the Dolphin Quad Battery Charger.
•
Place the battery back in the Auxiliary Battery Well of the IntelliBase+.
Storing Batteries
To maintain top performance from batteries, follow the guidelines below when
storing them:
Avoid storing batteries outside the specified range of -4 to 104° F (-20 to 40°C) or
in extremely high humidity.
For prolonged storage, do not keep batteries stored in a charger that is connected
to a power source.
During long-term storage, battery deactivation may tend to occur, which may
cause charging to stop early during recharging after storage. This issue can be
handled by charging and discharging the battery several times. Also, the first
charging after prolonged storage may yield a lower than normal capacity. While
this will vary depending on the storage conditions, charging and discharging the
battery several times will almost completely restore capacity.
•
•
•
37
•
•
•