Using The Modem - Dolphin 7400 User Manual

Using the Modem

If your Dolphin 7400 is equipped with the optional integrated modem, you can
allow communications via an analog phone line for dial-up applications. A phone
jack is built into the back of the Dolphin 7400. The optional integrated modem is
not available on the Dolphin 7450 terminal.
To communicate via the modem, remove the rubber plug from the phone jack and
connect the analog phone line.
phone jack when it is not in use to protect the integrity of the connector.
If you have not already configured the modem, refer to
Chapter 2.
To make a connection:
1. From the Control Panel, select Start>Programs>Communication>Remote Networking.
2. Enter your User Name and Password.
3. Touch Dial Properties and select Tone Dialing. Note: Check Dialing Patterns and edit,
if necessary, i.e., if 9 or the area code must be dialed with local calls.
4. Touch Connect.
Phone Jack
Phone Jack on rear of Dolphin 7400
Note: The rubber plug should be inserted in the
in
Configuring the Modem
49
•
•
•
•
•
•