Table of Contents
Advertisement
Table 3: IntelliBase/IntelliBase+ Switch Settings
Baud Rate
Switch 1
115200
OFF
ON
57600
ON
38400
ON
19200
ON
9600
Powering the Dolphin Terminal
Dolphin charging/communication cradles provide power to the intelligent battery
charging system incorporated into Dolphin terminals. This charging method
protects the battery from being damaged by overcharging. Therefore, Dolphin
terminals may be stored indefinitely in the charging/communication cradles
without damage to the terminals, battery packs, or peripherals.
To charge a Dolphin terminal, follow these steps:
1. Insert a battery pack into the Dolphin terminal.
2. Place the terminal, imager/laser engine window up and the LCD visible, in the terminal
well of the cradle.
3. Let it glide down into the well until it stops.
4. Once the Dolphin terminal is properly seated, the Dock LED on the front of the cradle
will be solid GREEN.
Charging Additional Battery Packs in the IntelliBase+
The auxiliary battery well located on the back of the IntelliBase+ allows users to
charge and condition a spare battery. Charging a Dolphin terminal and a spare
battery pack can be done simultaneously as the charging slots work
independently to control charging and conditioning of the individual batteries. The
IntelliBase+ senses when a battery pack is fully charged and automatically
switches to trickle charge to maintain the battery at full capacity indefinitely.
To charge a spare battery in the IntelliBase+, insert the end of the battery without
the locking tab into the bottom of the auxiliary well opening and snap the battery
into place with a hinging motion. Once the battery is inserted, you can use the
AUX BATTERY LED to monitor the charging progress.
Switch 2
Switch 3
ON
ON
OFF
OFF
OFF
ON
ON
OFF
ON
ON
Switch 4
N/A
N/A
N/A
N/A
N/A
•
•
•
65
•
•
•
Advertisement
Table of Contents
