Rear Panel - Dolphin 7400 User Manual

Charging Pocket
The QuadCharger has four charging pockets for charging and/or conditioning
batteries for Dolphin 7400/7450 terminals.
Power Switch
Press and hold the Power Switch for approximately one second, then release, to
turn on the QuadCharger. The Power Switch LED is green when the unit is on. To
turn the charger off, press and hold the Power Switch for about two seconds and
then release. This feature prevents the unit from being accidently turned off during
use or on when not in use.
Condition Switch
Press the Condition Switch to start a battery conditioning cycle. The orange
Conditon Switch LED flashes during the conditioning cycle.
Status LEDs
A Status LED is located above each of the four battery pockets.

Rear Panel

Communications Port
Rear Panel of Dolphin 7400 Quad Charger
Power Supply Connector
Use this connector to attach the power supply to the QuadCharger. The universal
power supply accepts input voltages between 90-265 volts.
Communications Port
The communications port is for factory use only in programming the
QuadCharger.
•
•
•
78
•
•
•
Power Supply Connector