Configuring The Dolphin Terminal - Dolphin 7400 User Manual

Setting the Baud Rate
After connecting the cables and supplying power to the Mobile IntelliBase, set the
baud rate switch. Refer to the Baud Rate Tables earlier in this section for
guidance on setting the switch.

Configuring the Dolphin Terminal

The Communications Properties must be configured on Dolphin 7400/7450
terminal in order for it to communicate with the Mobile IntelliBase.
To set Communications Properties:
1. Select Start>Settings>Control Panel>Communication Settings.
2. Select the PC Connection tab.
•
•
•
90
•
•
•
Communications Properties