Configuring The Dolphin Terminal - Dolphin 7400 User Manual

Set the baud rate switch to the communication mode you are going to use. Refer
to Table 2 for HomeBase switch settings or Table 3 for IntelliBase/IntelliBase+
switch settings.

Configuring the Dolphin Terminal

The Communications Properties must be configured on the Dolphin 7400/7450 in
order for the terminal to communicate with the Dolphin charging/communication
cradles.
To set Communications Properties:
1. Select Start>Settings>Control Panel>Communication Settings.
2. Select the PC Connection tab.
•
•
•
68
•
•
•
Communications Properties