Battery Power; Main Battery Pack - Dolphin 7850 Series User Manual

Battery Power

The Dolphin 7850 features intelligent battery technology with two types of battery power:
• The main battery pack installed under the battery door on the back panel.
• The backup battery located inside the terminal.
Both batteries work together to prevent data loss when the terminal is used over long periods of time.
Both batteries must be charged to full capacity before using the Dolphin 7850 for the first time!

Main Battery Pack

! Use only the Li-ion battery packs provided by Hand Held Products. The use of any battery pack not sold/manufactured by Hand
Held Products in a Dolphin terminal will void your warranty and may result in damage to the Dolphin terminal or battery.
The 7.4V, 14.8 watt hour Li-ion battery pack is the primary power source for the Dolphin terminal and the internal backup battery.
The Li-ion battery is designed to operate in a temperature range of -10 to 50° C (14 to 122° F).
Installing the Main Battery Pack
Put the terminal in suspend mode (see
! The battery door contains a mechanical switch that automatically suspends terminal operation while open. Because of this switch,
the terminal will not resume normal operations until the battery door is closed.
Charging Options
When the battery is installed in the terminal, you can insert the terminal into any one of the following peripherals to charge the
main battery pack:
• Dolphin HomeBase (see page 8-1)
• Dolphin ChargeBase (see page 11-1)
• One of the Dolphin charging cables (see page
To fully charge the Li-ion battery before installing it in the terminal, use the
• Dolphin QuadCharger (see page 9-1)
• Auxiliary Battery Well of the Dolphin HomeBase (see page 8-3)
Charge Time
The Li-ion battery pack requires four hours to charge to full capacity.
Dolphin® 7850 Series User's Guide -9/
19/06
Suspend Mode on page 3-13) before installing a new battery. Press Blue + Backlight keys.
Mechanical Switch
10-1)
Second Draft 3 - 9