Table of Contents
Advertisement
4
Using the Dolphin 7400/7450
Entering Data
Data can be entered into the Dolphin 7400/7450 through a variety of
ways, including the optional touchscreen, keyboard, image engine,
laser scanner, via radio or the optional modem (7400 only).
Via the Touchscreen Input
If so equipped, you can use the Dolphin 7400/7450 terminal's
touchscreen to operate the terminal and enter data.
To enter data, use a stylus to select menu options, functions, etc.
Note: For touchscreen input, only use a stylus or your finger. Use of other
objects, such as paper clips, pencils, ink pens can damage the
touchscreen and will void the warranty.
Via the Keyboard
Data can be entered into the Dolphin 7400/7450 terminal via the
keyboard. The Dolphin 7400 has three keyboard options: 43-key
alpha/numeric, 35-key numeric/alpha, and 56-key full alpha/numeric.
To enter data, press the appropriate key and the corresponding
number or letter appears on the screen.
See Appendix A for a list of keyboard shortcuts for navigating the
keyboard.
A mouse utility is also available to help with navigating around the
Dolphin 7400/7450 terminal screen.*
* Exit the mouse utility prior to adjusting the contrast.
Using the Image Reader
Dolphin 7400/7450 terminals equipped an image reader can read 1D
and 2D bar codes, OCR characters and can capture images, such as
signatures.
The imager has a viewfinder that projects a bright red aiming beam.
Center the aiming beam over the bar code for the best read, though a
good read can be obtained from most any position.
The omni-directional scanning capabilities of the Dolphin 7400 and
7450 terminals greatly simplify operation and training and will
increase productivity.
•
•
•
39
•
•
•
Advertisement
Table of Contents
