Removing The Engine From The Frame - Derbi GPR125 Workshop Manual

4 - ENGINE

4.2 - REMOVING THE ENGINE FROM THE FRAME

WARNING
REMOVAL
1. Firstly remove:
* The bottom side covers.
* The bottom fairing.
* The seat.
* The tank.
* The chain.
* The exhaust pipe.
2. Remove:
- The spark plug connector cap.
- Rocker cover oil vapour breather pipe (rocker cover-air
filter box).
3. Loosen:
- The gear lever bolt (1).
4. Remove:
- The gear lever.
- The neutral sensor cable.
5. Loosen:
- The nut and bolt (2) on the rear brake pedal.
- The oil pressure sensor cable (3).
6. Disconnect:
- The pipe from the radiator to the thermostat cover (4).
7. Disconnect:
- The coolant temperature sensor (5).
- The AIS valve (6).
89
DO NOT REMOVE THE EXHAUST
SYSTEM OR THE RADIATOR HO-
SES IF THE ENGINE IS HOT, SINCE
THIS COULD RESULT IN BURNS.
1
2
3
6
4
5