Derbi GPR125 Workshop Manual page 24

1 - GENERAL INFORMATION
LUBRICATION SYSTEM
Oil pressure (manometer connected in sensor)
Pump with 2 rotors
Oil suction rotor
Thickness
Oil pumping rotor
Thickness
Radial clearance (1) between rotor points
Radial clearance (2) between rotor points
Axial clearance (3) between Rotor 1 and pump body
Axial clearance (3) between Rotor 2 and pump body
FRONT SUSPENSION
Type
Travel
Arm warp
Quantity of hydraulic fluid
Fluid viscosity
REAR SUSPENSION
Type
Travel
WHEEL RIMS AND TYRES
Wheel rims axial warp
Wheel rims radial warp
Standard shafts warp
Service limit shafts warp
Wheel rim material
Front tyre pressure
For rider only
With pillion passenger
Rear tyre pressure for rider only
For rider only
With pillion passenger
Minimum tyre tread depth
24
4,2 Bar
13,5 mm
8,5 mm
0,04 mm
0,08 mm
0,04 mm
0,05 mm
Inverted forks
110 mm
0,4 mm
390 ml ± 5
SAE 7,5
Single shock absorber
135 mm
0,5 mm
0,6 mm
0,05 mm
0,2 mm
Aleación de aluminio
1,9 bar
2 bar
2 bar
2,2 bar
1,6 mm