Table of Contents
Advertisement
8 - CHASSIS
6. Insert:
- Hydraulic fluid.
Quantity of oil: 390 ml ±5 ml.
Type of oil: SAE 7.5 W
N.B.
7. Fit:
- The top locking bolt, holding the locknut.
Locknut
17,6 – 21,5 N.m (1,76 – 2,15 kgf.m)
CAUTION
8. Fit:
- The top locking bolt to the fork arm.
N.B.
9. Fit:
- The fork arms onto the plates.
10. Tighten:
- The plate bolts.
- The top locking bolt.
Tightening torques for the fork assembly elements:
The top plate closing device (A-B)
17 – 19 N.m (1,7 – 1,9 kgf.m)
CAUTION
194
AS THE FLUID IS BEING INSERTED,
PUMP THE STEM UP AND DOWN
TO EXPEL THE AIR.
PLACE A PROTECTOR BETWEEN
THE BAR AND THE SPANNER TO
AVOID DAMAGING THE FORMER.
APPLY A THIN LAYER OF HYDRAU-
LIC FLUID TO THE O-RING (3).
RESPECT THE TIGHTENING TOR-
QUES TO AVOID DISTORTING THE
FORK ARM.
3
A
B
Advertisement
Table of Contents
