Renewing The Water Pump Oil Seal - Derbi GPR125 Workshop Manual

6 - COOLING SYSTEM

6.3 - RENEWING THE WATER PUMP OIL SEAL

DESCRIPTION
1
- The water pump oil seal (1) is of a metal type with a
ceramic interior.
- If liquid is leaking out of the hole (2) in the clutch cover
at the height of the water pump, this is an indication that
the oil seal needs to be replaced.
- A hydraulic press and tool kit Ref. 866380 are required
to renew the oil seal.
- Grease the various elements to aid their insertion.
2
O-ring (1) Ref. 871418
Oil seal (2) Ref. 842595
Gasket (3) Ref. 871557
Shaft/bearings (4) Ref. 871372
Oil seal (5) Ref.82871R
RENEWAL OF ELEMENTS 2, 3 AND 5 IS OBLIGATORY.
CAUTION
Inspect the bearings and the shaft.
Wear => Renew
175