Table of Contents
Advertisement
10 - ELECTRICAL SYSTEM
RESETTING SERVICE INDICATOR
1- Once the machine has travelled the distance set out on the table below, the system will activate
the inspection function, which appears on the display in the form of the following icon:
2- Service intervals
FIRST WARNING
WARNING INTERVAL
3- Deactivating the service symbol:
First enter into configuration mode. To do so, enter a three figure code – in this case 423, which will allow
changing from kilometres to miles, service resetting, as well as resetting the odometer to zero on a once
only basis and providing the machine has clocked less than 200 km.
4- To access the configuration described, the MODE button (1)
(located on the starter control) must be held down for at
least 10 seconds, in the interval time of 1.5 to 4 seconds
maximum after turning on the ignition. The following should
be displayed:
232
1000 Kms
6000 Kms
1
Advertisement
Table of Contents
