5 - FUEL SUPPLY SYSTEM
- Refit the needle spring.
- Refit the vacuum chamber cover, taking care to ensure that
the spring is correctly fitted into the housing in this cover.
CAUTION
- Tighten the screws.
- Wash and blow through the atmospheric pressure intake
filter sponge.
- Refit the filter with the corresponding clamp.
- Wash and blow through the choke support with compres-
sed air.
- Fit a new gasket onto the carburettor body and lock the 2
securing bolts.
165
TAKE CARE WHEN FITTING THE
COVER TO AVOID PINCHING
THE MEMBRANE.