Jump Starting - BMW R 1200 RT Rider's Manual

6
118
• Turn bulb holder 1 counter-
clockwise to remove it from
the bulb housing.
• Press bulb 2 into its socket
and turn it counter-clock-
wise to remove.
Installation is the reverse of the
removal procedure.
• Use a clean, dry cloth to hold
the new bulb.
• When installing the mirror
housing, make sure that the
three plugs all engage in
their corresponding mounts.
The mirror must be firmly
seated in the mounts to
keep it secure.
Do not use lubricants when in-
stalling the mirrors.c

Jump starting

The wires leading to the
power socket do not
have a load-capacity rating
adequate for jump-starting the
engine. Excessively high cur-
rent can lead to a cable fire or
damage to the vehicle elec-
tronics.
Do not use the on-board sock-
et to jump-start the engine.c
Do not use proprietary
start-assist sprays or
other products to start the
engine.c