Front-wheel stand
A front-wheel stand for simple,
safe changing of the front
wheel is available from
BMW Motorrad. The BMW
special tool number is 363971
and the front-wheel stand is
available from your authorised
BMW motorcycle dealer. You
also need the adapters with
the BMW special tool number
363972.
Fitting the front wheel
stand
• Place the motorcycle on its
centre stand.
• Slacken adjusting screws 1.
• Push pins 2 apart until the
front forks fit between them.
• Use locating pins 3 to set the
front-wheel stand to the
desired height.
• Centre the front-wheel stand
relative to the front wheel
and push it against the front
axle.
• Push pins 2 in until the front
forks are securely located.
• Tighten adjusting screws 1.
6
111