BMW R 1200 RT Rider's Manual page 119

• Switch off the ignition.
• Remove screws 1 on left and
right.
• Pull the bulb housing to the
rear until it is clear of holders 2.
• Turn bulb holder 3 counter-
clockwise to remove it from
the bulb housing.
• Press the bulb into its socket
and turn it counter-clock-
wise to remove.
Installation is the reverse of the
removal procedure.
• Use a clean, dry cloth to hold
the new bulb.
Replacing front turn
indicator bulb
If it is not standing firmly,
the motorcycle could
topple in the course of the op-
erations described below.
Make sure that the motorcycle
is steady on its stand.c
• Switch off the ignition.
• Apply firm forward pressure
with the flat of your hand to
push the mirror back out of
the anchorage.
6
117