BMW R 1200 RT Rider's Manual page 115

Replacing high-beam
headlight bulb
The bulb is pressurised
and can cause injury if
damaged.
Wear protective goggles and
gloves when changing
bulbs.c
If it is not standing firmly,
the motorcycle could
topple in the course of the op-
erations described below.
Make sure that the motorcycle
is steady on its stand.c
Turn the handlebars
to the left to facilitate
access.c
• Switch off the ignition.
• Turn cover 1 counter-clock-
wise and remove it.
• Disconnect plug 2.
• Disengage spring clip 3 at
left and right and secure it
(preferably by hooking it into
the headlight housing).
• Remove bulb 4.
6
113