E Information Cannot Be Entered From The Keyboard; And Displayed; E Information Cannot Be Entered From The Keyboard And Displayed - IBM SYSTEM/36 5362 Setting Up

INFORMATION CANNOT BE ENTERED FROM THE KEYBOARD AND DISPLAYED
1. Set the display station Power switch to the Off position.
Check the keyboard cable connection on the display station
that you are working with. Set the display station Power
switch to the On position.
2. If the display station has the keylock feature, make sure the
key is turned to the On position (see the setup manual for
that device).
3. Try again to select an option or enter information from the
keyboard.
4. Were you able to enter information successfully from the
keyboard?
If there is no keyboard cable connection to
the display station, try swapping the system
console with another display station.
Return to
lID
if you had trouble selecting
option 1 at the system console.
YES NO .......... Section 12.£ Continued
-
-
"..
'----------------------:
----------------
:-----------------------')
-
-
- -
. . §
OR
(see additional
information)
- - -
-
- -
T
Responding to System Reference Codes and other Problems 297
•