D Work Station Addresses And Port Numbers Do; Not Match; D Work Station Addresses And Port Numbers Do Not Match - IBM SYSTEM/36 5362 Setting Up

WORK STATION ADDRESSES AND PORT NUMBERS DO NOT MATCH
294
Do the following for each device that is not shown. on display
61:
1 . Make sure the Power switch on each display station and
printer is set to the I (On) position.
2. Make sure each work station is plugged into an outlet.
3. Make sure the keylock is turned to the On position (see the
setup manual for that device).
4. Check the work station address switches to make sure they
match the Local Work Station Diagram. If any two work
stations on the same port have the same address, neither
work station is shown on display 61 .
a. Turn off each work station not displayed correctly on
display 61.
b. Set the correct address.
c. Turn on each work station.
Results of the checkout program can be
unpredictable if the address switches are not
set correctly.