IBM SYSTEM/36 5362 Setting Up page 316

I ••••
I~
24AA
24AC
24AE
24AF
24CO
24C1
24C2
24C3
24C4
24C5
24FF
Cause:
Action:
5030
Cause:
Action:
An IBM program error occurred.
Call your programming service representative. You
probably cannot use the system because of this
reference code.
An error occurred somewhere within the computer
communications circuits.
1. Check the wrap connector connection again. If
you have the
Autocall
feature, also check the
cable(s) connected to sockets A and B.
2. Check that the communications cable(s) is
connected to the computer.
3. Select option 1 and press the Enter key to try
again.
•
• •• I •• ~ Section 12.F Continued
Responding to System Reference Codes and other Problems 305