A No Power On Light - IBM SYSTEM/36 5362 Setting Up

NO POWER ON LIGHT
286
Power On light should glow green when on.
Q-O~~
\bIIage
Current
I
DIskette
,nUse
c:::J c:::J c:::J
Program
~~I
c:::J c:::J c:::J
Funcbon
Cause: One of the following conditions exists:
• The power cord is not plugged in (
&I
and
IfD ).
• The security key is either not inserted or not turned to the
Service position ( _ ).
• The Unit Emergency switch is not set to the Power Enable
position (
ID ).
• There is no power to the electrical outlet.
Action:
1. Check the above causes.
2. Return to
1&
and do the computer checkout again.
If you still cannot get a Power On light on your computer, call
your hardware service representative.
Unit
Emergency
Switch
Security
key
If you came here from
Section
9:
Checking
Out Your System,
return to
ED.