IBM TOKEN-RING ADAPTER(S) NOT DETECTED
Do the following for each IBM Token-Ring adapter that is not
shown on display 35:
1.
Power off the 5362 System Unit.
2.
Power off the Personal Computer AT.
3.
Check both ends of the signal cable (make sure the cable is
connected to the correct ports and that the connection is
tight).
4.
Make sure that the switches on the IBM Token-Ring adapters
are set correctly.
5.
Power on the Personal Computer AT. Do not use any
diskettes in the diskette drives.
6.
Go back to _ .
7.
If the problem still exists, contact your PC hardware service
representative. -
•
Responding to System Reference Codes and other Problems 341