Section 10. Connecting The Communications Cable(S) - IBM SYSTEM/36 5362 Setting Up

-
Section 10. Connecting the Communications Cable(s)
Connecting the communications cable(s) from the computer to
a modem or channel service unit is your last step in the setup
process.
If you are planning to do this now, your modem(s) or channel
service unit(s) should have been set up and checked out before
you came to this section. The instructions for setting up and
checking out the communications equipment are packaged with
each device.
Are you planning to connect the communications cable(s) NOW or
LATER?
NOW
LATER
-
-
-
-
-
-
-
-
- -
-
-
.- ..
A modem or channel service unit is a device
that changes the signal from the computer
into a signal that can be transmitted on a
telephone line to another computer or device
at a different location.
LATER can mean a week, month, or even a
year after you have installed the computer.
Connecting the Communications Cablels..L 263
-